Melt Flow Index Tester For High Melt Index PP

Melt Flow Index Tester For High melt index PP

This modeli melt flow index tester is  

specifically for melt-blown materials( High melt index PP)

Flow rate range: (0 ～ 5000g) / 10min 

or (0 ～ 6000cm³) / 10min

Application:

This machine is suitable for the detection of materials with large melt flow rate. Plastics with high melt temperature such as polyethylene, polysulfone, fluoroplastic, nylon and other melts with high melt flow rates are also suitable for melt flow rates of polyethylene, polystyrene, polypropylene ABS resin, polyoxymethylene resin, etc. Larger plastic testing.

It is suitable for colleges, scientific research units, various quality inspection institutions, plastic production enterprises, plastic products and petrochemical industries.

Features:

1. The whole machine adopts advanced ARM control system, the temperature control mode adopts PID adjustment mode, and the performance is stable

2. The display screen adopts a 5-inch color high-definition touch screen, which is simple and intuitive and easy to operate.

3. The heating jacket is an integrated structure, the failure rate is extremely low, the heating power is large, the heating speed is fast, and the constant temperature precision is high.

4. The test machine is compact and beautiful, with functions such as upper temperature protection.

5. Equipped with a micro printer to directly print the test results

Applicable standards:

GB/T3682-2000、ASTMD1238、BS2782、ISO1133：2005

Technical Parameters; 

1. Display mode: 5 inch color touch screen

2. Measurement methods: volume method (MVR), mass method (MFR), density method.

3. Control system: ARM control system, temperature control mode adopts PID adjustment mode

4. Flow rate measurement range: (0 ～ 5000g) / 10min or (0 ～ 6000cm³) / 10min

5. Time timing accuracy: 0.001 seconds

6. Temperature control range: room temperature ～ 450 ℃

7. Temperature control accuracy: ≤ ± 0.2 ℃

8. Temperature display resolution: 0.1 ℃

9. Temperature recovery time: <4min

10. Sample adding method: manual loading

11. Feeding part:

a) Outlet-diameter: Φ2.095 ± 0.005mm; length: 8 ± 0.025mm

b) Loading barrel-diameter: Φ9.550 ± 0.025mm; length: 152 ± 0.1mm

c) Piston rod head-diameter: Φ9.475 ± 0.015mm; length: 6.350 ± 0.1mm

12. Instrument size: length 460mm × width 300mm × height 650mm

13. Instrument weight: 15Kg

14. Power source: 220V, 50HZ, 800W

15. Standard test load: (relative error of test load ≤0.5%)

a) Standard eight levels: 0.325kg, 1.200kg, 2.160kg, 3.800kg, 5.000kg, 10.000kg, 12.500kg, 21.600kg

B) Optional: 1kg, 1.05kg, 31.6kg

16. Output mode: micro printer

configuration list:

1. melt flow index tester       1

2. die head (Φ2.095mm)       1

3. die head clearing drill        1

4. Wiping rod                         1

5. die taking rod                    1

6. Spirit level                         1

7. Feeding funnel                 1

8. Test material tray             1

9. A power cord                   1

10. standard weights           1

11. Built-in micro printer     1