ZX6350D drilling and milling machine bed and parts of the cleaning work, cleaning iron and the surrounding environment, sanitation, cleaning, clamping, measuring tools;
Check the oil level, shall not be less than the oil mark, filling the various parts of the lubricating oil
Milling machine maintenance weekend:
Spindle milling machine maintenance:
1, headstock, worktable, gearbox cleaning, oil change;
2, the drilling and milling machine manufacturers to clean the oil pump and tubing, check and adjust the work table, the gap between the screw and screw nut;
3. Clean the clutch plate, clean the cooling box and replace the coolant
Drilling and milling machine guide surface and worktable:
1, clean and adjust the working table, the screw handle and the column
2, check, adjust the clutch;
3, clean the three guide rails and oil blankets, motors, machine tools and accessories inside and outside cleaning;
4, check the oil circuit, add the lubricating oil;
5 tighten the screws
Maintenance of transmission mechanism of drilling and milling machine:
1, the Ministry of oil wool felt dismantling and cleaning;
2, wipe the sliding surface and the surface of the guide rail, wipe the table and the horizontal, the lifting screw rod, wipe the knife transmission mechanism and tool holder;
3, wipe the dead corner
Lubrication and lubrication of drilling and milling machine:
1, the oil hole clean flow and add lubricating oil;
2, each of the guide surface and sliding surface and the screw rod filling lubricating oil;
3, check the transmission body of the oil tank, oil surface, and fuel to the elevation position
Other parts of drilling and milling machine:
1, check and tighten the pressure plate and the screw
2, check and tighten the slide screw, feed driving mechanism, handwheel, table bracket screws, fork top wire;
3, check the other parts of screw loosening of screws.